Thursday, 2 April 2015

Session on Parameters and Variables

Types of Parameters and Variables

There are many types of Parameters and Variables we can define. Please find below the comprehensive list:

  • Service Variables: To override the Integration Service variables such as email addresses, log file counts, and error thresholds. Examples of service variables are $PMSuccessEmailUser, $PMFailureEmailUser, $PMWorkflowLogCount, $PMSessionLogCount, and $PMSessionErrorThreshold.
  • Service Process Variables: To override the the directories for Integration Service files for each Integration Service process. Examples of service process variables are $PMRootDir, $PMSessionLogDir and $PMBadFileDir.
  • Workflow Variables: To use any variable values at workflow level. User-defined workflow variables like $$Rec_Cnt
  • Worklet Variables: To use any variable values at worklet level. User-defined worklet variables like $$Rec_Cnt. We can use predefined worklet variables like $TaskName.PrevTaskStatus in a parent workflow, but we cannot use workflow variables from the parent workflow in a worklet.
  • Session Parameters: Define values that may change from session to session, such as database connections, db owner, or file names. $PMSessionLogFile, $DynamicPartitionCount and $Param_Tgt_Tablename are user-defined session parameters. List of other built in Session Parameters:

    $PMFolderName, $PMIntegrationServiceName, $PMMappingName, $PMRepositoryServiceName, $PMRepositoryUserName, $PMSessionName, PMSessionRunMode [Normal/Recovery], $PM_SQ_EMP@numAffectedRows, $PM_SQ_EMP@numAppliedRows, $PM_SQ_EMP@numRejectedRows, $PM_SQ_EMP@TableName, $PM_TGT_EMP@numAffectedRows, $PM_TGT_EMP@numAppliedRows, $PM_TGT_EMP@numRejectedRows, $PM_TGT_EMP@TableName, $PMWorkflowName, $PMWorkflowRunId, $PMWorkflowRunInstanceName.

    Note: Here SQ_EMP is the Source Qualifier Name and TGT_EMP is the Target Definition.

  • Mapping Parameters: Define values that remain constant throughout a session run. Examples are $$LOAD_SRC, $$LOAD_DT. Predefined parameters examples are $$PushdownConfig.
  • Mapping Variables: Define values that changes during a session run. The Integration Service saves the value of a mapping variable to the repository at the end of each successful session run and uses that value the next time you run the session. Example $$MAX_LOAD_DT

Difference between Mapping Parameters and Variables

A mapping parameter represents a constant value that we can define before running a session. A mapping parameter retains the same value throughout the entire session. If we want to change the value of a mapping parameter between session runs we need to Update the parameter file.

A mapping variable represents a value that can change through the session. The Integration Service saves the value of a mapping variable to the repository at the end of each successful session run and uses that value the next time when we run the session. Variable functions like SetMaxVariable, SetMinVariable, SetVariable, SetCountVariable are used in the mapping to change the value of the variable. At the beginning of a session, the Integration Service evaluates references to a variable to determine the start value. At the end of a successful session, the Integration Service saves the final value of the variable to the repository. The next time we run the session, the Integration Service evaluates references to the variable to the saved value. To override the saved value, define the start value of the variable in the parameter file.

Parameterize Connection Object

First of all the most common thing we usually Parameterise is the Relational Connection Objects. Since starting from Development to Production environment the connection information obviously gets changed. Hence we prefer to go with parameterisation rather than to set the connection objects for each and every source, target and lookup every time we migrate our code to new environment.E.g.

  • $DBConnection_SRC
  • $DBConnection_TGT

If we have one source and one target connection objects in your mapping, better we relate all the Sources, Targets, Lookups and Stored Procedures with $Source and $Target connection. Next we only parameterize $Source and $Target connection information as:

  • $Source connection value with the Parameterised Connection $DBConnection_SRC
  • $Target connection value with the Parameterised Connection $DBConnection_TGT

Lets have a look how the Parameter file looks like. Parameterization can be done at folder level, workflow level, worklet level and till session level.

[WorkFolder.WF:wf_Parameterize_Src.ST:s_m_Parameterize_Src]  $DBConnection_SRC=Info_Src_Conn  $DBConnection_TGT=Info_Tgt_Conn  

Connection Object Parameter

Here Info_Src_Conn, Info_Tgt_Conn are Informatica Relational Connection Objects.

Note: $DBConnection lets Informatica know that we are Parameterizing Relational Connection Objects.

For Application Connections use $AppConnection_Siebel, $LoaderConnection_Orcl when parameterizing Loader Connection Objects and $QueueConnection_portal for Queue Connection Objects.

In a precise manner we can use Mapping level Parameter and Variables as and when required. For example $$LOAD_SRC, $$LOAD_CTRY, $$COMISSION, $$DEFAULT_DATE, $$CDC_DT.

Parameterize Source Target Table and Owner Name

Situation may arrive when we need to use a single mapping from various different DB Schema and Table and load the data to different DB Schema and Table. Condition provided the table structure is the same.

A practical scenario may be we need to load employee information of IND, SGP and AUS and load into global datawarehouse. The source tables may be orcl_ind.emp, orcl_sgp.employee, orcl_aus.emp_aus.

So we can fully parameterize the Source and Target table name and owner name.

  • $Param_Src_Tablename
  • $Param_Src_Ownername
  • $Param_Tgt_Tablename
  • $Param_Tgt_Ownername

The Parameterfile:-

[WorkFolder.WF:wf_Parameterize_Src.ST:s_m_Parameterize_Src]  $DBConnection_SRC=Info_Src_Conn  $DBConnection_TGT=Info_Tgt_Conn  $Param_Src_Ownername=ODS  $Param_Src_Tablename=EMPLOYEE_IND  $Param_Tgt_Ownername=DWH  $Param_Tgt_Tablename=EMPLOYEE_GLOBAL  

Check the implementation image below:

Source Tablename and Ownername

Target Tablename and Ownername

Parameterize Source Qualifier Attributes

Next comes what are the other attributes we can parameterize in Source Qualifier.

  • Sql Query: $Param_SQL
  • Source Filter: $Param_Filter
  • Pre SQL: $Param_Src_Presql
  • Post SQL: $Param_Src_Postsql

If we have user-defined SQL statement having join as well as filter condition, its better to add a $$WHEREclause at the end of your SQL query. Here the $$WHERE is just a Mapping level Parameter you define in your parameter file.

In general $$WHERE will be blank. Suppose we want to run the mapping for todays date or some other filter criteria, what you need to do is just to change the value of $$WHERE in Parameter file.

$$WHERE=AND LAST_UPDATED_DATE > SYSDATE -1   [WHERE clause already in override query]  OR   $$WHERE=WHERE LAST_UPDATED_DATE > SYSDATE -1   [NO WHERE clause in override query]  

Parameterize Target Definition Attributes

Next what are the other attributes we can parameterize in Target Definition.

  • Update Override: $Param_UpdOverride
  • Pre SQL: $Param_Tgt_Presql
  • Post SQL: $Param_Tgt_Postsql
$Param_UpdOverride=UPDATE $$Target_Tablename.EMPLOYEE_G SET   ENAME = :TU.ENAME, JOB = :TU.JOB, MGR = :TU.MGR, HIREDATE = :TU.HIREDATE,   SAL = :TU.SAL, COMM = :TU.COMM, DEPTNO = :TU.DEPTNO  WHERE EMPNO = :TU.EMPNO  

Parameterize Flatfile Attributes

Now lets see what we can do when it comes to Source, Target or Lookup Flatfiles.

  • Source file directory: $PMSourceFileDir\ [Default location SrcFiles]
  • Source filename: $InputFile_EMP
  • Source Code Page: $Param_Src_CodePage
  • Target file directory: $$PMTargetFileDir\ [Default location TgtFiles]
  • Target filename: $OutputFile_EMP
  • Reject file directory: $PMBadFileDir\ [Default location BadFiles]
  • Reject file: $BadFile_EMP
  • Target Code Page: $Param_Tgt_CodePage
  • Header Command: $Param_headerCmd
  • Footer Command: $Param_footerCmd
  • Lookup Flatfile: $LookupFile_DEPT
  • Lookup Cache file Prefix: $Param_CacheName

Parameterize FTP Connection Object Attributes

Now for FTP connection objects following are the attributes we can parameterize:

  • FTP Connection Name: $FTPConnection_SGUX
  • Remote Filename: $Param_FTPConnection_SGUX_Remote_Filename [Use the directory path and filename if directory is differnt than default directory]
  • Is Staged: $Param_FTPConnection_SGUX_Is_Staged
  • Is Transfer Mode ASCII:$Param_FTPConnection_SGUX_Is_Transfer_Mode_ASCII

Parameterization of Username and password information of connection objects are possible with$Param_OrclUname.

When it comes to password its recommended to Encrypt the password in the parameter file using thepmpasswd command line program with the CRYPT_DATA encryption type.

Using Parameter File

We can specify the parameter file name and directory in the workflow or session properties or in the pmcmd command line.

We can use parameter files with the pmcmd startworkflow or starttask commands. These commands allows us to specify the parameter file to use when we start a workflow or session.

The pmcmd -paramfile option defines which parameter file to use when a session or workflow runs. The -localparamfile option defines a parameter file on a local machine that we can reference when we do not have access to parameter files on the Integration Service machine

The following command starts workflow using the parameter file, param.txt:

pmcmd startworkflow -u USERNAME -p PASSWORD   -sv INTEGRATIONSERVICENAME -d DOMAINNAME -f FOLDER  -paramfile 'infa_shared/BWParam/param.txt'   WORKFLOWNAME  

The following command starts taskA using the parameter file, param.txt:

pmcmd starttask -u USERNAME -p PASSWORD   -sv INTEGRATIONSERVICENAME -d DOMAINNAME -f FOLDER  -w WORKFLOWNAME -paramfile 'infa_shared/BWParam/param.txt'   SESSION_NAME  

Workflow and Session Level Parameter File

When we define a workflow parameter file and a session parameter file for a session within the workflow, the Integration Service uses the workflow parameter file, and ignores the session parameter file. What if we want to read some parameters from Parameter file at Workflow level and some defined at Session Level parameter file.

The solution is simple:

  • Define Workflow Parameter file. Say infa_shared/BWParam/param_global.txt
  • Define Workflow Variable and assign its value in param_global.txt with the session level param file name. Say $$var_param_file=/infa_shared/BWParam/param_runtime.txt
  • In the session properties for the session, set the parameter file name to this workflow variable.
  • Add $PMMergeSessParamFile=TRUE in the Workflow level Parameter file.

Content of infa_shared/BWParam/param_global.txt

[WorkFolder.WF:wf_runtime_param]  $DBConnection_SRC=Info_Src_Conn  $DBConnection_TGT=Info_Tgt_Conn  $PMMergeSessParamFile=TRUE  $$var_param_file=infa_shared/BWParam/param_runtime.txt  

Content of infa_shared/BWParam/param_runtime.txt

[WorkFolder.wf:wf_runtime_param.ST:s_m_emp_cdc]  $$start_date=2010-11-02  $$end_date=2010-12-08  

The $PMMergeSessParamFile property causes the Integration Service to read both the session and workflow parameter files.

No comments:

Post a Comment